International Journal

(: Equal contribution, *: Corresponding authors)

 

2017

118. High Power Density Electrochemical Thermocells for Inexpensively Harvesting Low-Grade Thermal Energy. Long Zhang, Taewoo Kim, Na Li, Tae June Kang, Jun Chen, Jennifer M. Pringle, Mei Zhang, Ali H. Kazim, Shaoli Fang, Carter Haines, Danah Al-Masri, Baratunde A. Cola, Joselito M. Razal, Jiangtao Di, Stephen Beirne, Douglas R. MacFarlane, Anuncia Gonzalez-Martin, Sibi Mathew, Yong Hyup Kim, Gordon Wallace and Ray H. Baughman, Advanced Materials, 10.1002/adma.201605652 (2017).

117.  High thermopower of ferri/ferrocyanide redox couple in organic-water solutions. Taewoo Kim, Jeong Seok Lee, Geonhui Lee, Hongsik Yoon, Jeyong Yoon, Tae June Kang and Yong Hyup Kim, Nano Energy 31, 160-167 (2017).

 

2016

116. Flow-less and shape-conformable CNT sheet nanogenerator for self-powered motion sensor. Hyelynn Song, Taewoo Kim, Hyeongwook Im, Raquel Ovalle-Robles, Tae June Kang and Yong Hyup Kim, Nanoscale, 8(37), 16719-16724 (2016).

115. Membrane of Functionalized Reduced Graphene Oxide Nanoplates with Angstrom-Level Channels. Byeongho Lee1, Kunzhou Li, Hong Sik Yoon, Jeyong Yoon, Yeongbong Mok, Yan Lee, Hong H. Lee & Yong Hyup Kim, Scientific Reports | 6:28052 | DOI: 10.1038/srep28052.

114. Preferential dewetting of gold thin films on single walled carbon nanotubes to produce nanogap electrodes. Taewoo Kim†, Hyeongwook Im†, Tae June Kang* and Yong Hyup Kim*, Journal of Materials Chemistry C 4, 5725-5730 (2016).

113. Autonomous Graphene Vessel for Suctioning and Storing Liquid Body of Spilled Oil. Taewoo Kim, Jeong Seok Lee, Geonhui Lee, Dong Kyun Seo, Youngbin Baek, Jeyong Yoon, Seung M. Oh, Tae June Kang*, Hong H. Lee* & Yong Hyup Kim*,  Scientific Reports 6, 22339 (2016).

112. High performance graphene foam emitter. Taewoo Kim, Jeong Seok Lee, Kunzhou Li, Tae June Kang* and Yong Hyup Kim*, Carbon 101, 345-351 (2016).

111. High-efficiency electrochemical thermal energy harvester using carbon nanotube aerogel sheet electrodes. Hyeongwook Im†, Taewoo Kim†, Hyelynn Song, Jongho Choi, Jae Sung Park, Raquel Ovalle-Robles, Hee Doo Yang, Kenneth D. Kihm, Ray H. Baughman, Hong H. Lee, Tae June Kang* and Yong Hyup Kim*, Nature Communications 7, 10600 (2016).

110. PDMS-paraffin/graphene laminated films with electrothermally switchable haze. Jae Yeol Park, Hyelynn Song, Taewoo Kim, Ji Won Suk, Tae June Kang*, Dongsoo Jung, Yong Hyup Kim*; Carbon  96, 805-811 (2016).

2015

109. High-performance carbon nanotube line emitters fabricated using mechanical clamping process. Jeong Seok Lee, Taewoo Kim, Hyelynn Song, Minwoo Lee, Dae Hong Jeong, Ji-Beom Yoo, Tae June Kang*, Yong Hyup Kim*; Journal of Alloys and Compounds 626, 287-291 (2015).

108. A carbon nanotube wall membrane for water treatment. Byeongho Lee, Youngbin Baek, Minwoo Lee, Dae Hong Jeong, Hong H. Lee, Jeyong Yoon* and Yong Hyup Kim*; Nature Communications 6, 7109 (2015).

107. Carbon nanotube-bonded graphene hybrid aerogels and their application to water purification. Byeongho Lee, Sangil Lee, Minwoo Lee, Dae Hong Jeong, Youngbin Baek, Jeyong Yoon and Yong Hyup Kim, Nanoscale 7, 6782-6789 (2015).

2014

106. High performance CNT point emitter with graphene interfacial layer; Jeong Seok Lee, Taewoo Kim, Seul-Gi Kim, Myung Rae Cho, Dong Kyun Seo, Minwoo Lee, Seontae Kim, Dae Weon Kim, Gun-Sik Park, Dae Hong Jeong, Yun Daniel Park, Ji-Beom Yoo, Tae June Kang* and Yong Hyup Kim*, Nanotechnology 25, 455601 (2014).

105. Nanotube Aerogel Sheet Flutter for Actuation, Power Generation, and Infrasound Detection. Tae June Kang, Taewoo Kim, Eui Yun Jang, Hyeongwook Im, Xavier Lepro-Chavez, Raquel Ovalle-Robles, Jiyoung Oh, Mikhail E. Kozlov, Ray H. Baughman, Hong H. Lee and Yong Hyup Kim, Scientific Reports 4, 6105 (2014).

104. Superior Rechargeability and Efficiency of Lithium–Oxygen Batteries: Hierarchical Air Electrode Architecture Combined with a Soluble Catalyst. Hee-Dae Lim, Hyelynn Song, Jinsoo Kim, Hyeokjo Gwon, Youngjoon Bae, Kyu-Young Park, Jihyun Hong, Haegyeom Kim, Taewoo Kim, Yong Hyup Kim, Xavier Lepr, Raquel Ovalle-Robles, Ray H. Baughman, and Kisuk Kang, Angew. Chem. Int. Ed. 53, 1–7 (2014).

103. Fouling and rejection behavior of carbon nanotube membranes. Seung-Min Park, Jungwoo Jung, Sangho Lee, Youngbin Baek, Jeyong Yoon, Dong Kyun Seo, Yong Hyup Kim. Volume 343, 16 June 2014, Pages 180–186. Desalination

102. Room-temperature control of the residual stress gradient in titanium micro-cantilever beams by helium ion implantation. Tae June Kang, Taewoo Kim, Sang-Hyun Park, Jae S. Lee, Jae H. Lee, Jun-Hee Hahn, Ho-Young Lee and Yong Hyup Kim*, Sensors & Actuators: A. Physical. 216, 116–122 (2014).

101. Self-powered humidity sensor based on graphene oxide composite film intercalated by poly(sodium 4-styrenesulfonate). Yu, Hyun-Woo;Kim, Hyoung Kyu; Kim, Taewoo; Bae, Kyoung Min; Seo, Sung Min; Kim, Jong-Man; Kang, Tae June*; Kim, Yong Hyup*. ACS Applied Materials & Interfaces. 6 (11), 8320–8326 (2014).

100. Flexible thermocell for utilization of body heat. Hyeongwook Im, Hyung Geun Moon, Jeong Seok Lee, In Young Chung, Tae June Kang* and Yong Hyup Kim*, Nano Research, 7(4), pp443-452, 2014.

99. Modification of Optical and Mechanical Surface Properties of Sputter-Deposited Aluminum Thin Films through Ion Implantation. Tae June Kang, Jeong-Gil Kim, Ho-Young Lee, Jae-Sang Lee, Jae-Hyung Lee,Jun-Hee Hahn, and Yong Hyup Kim. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 15, No. 5, pp. 889-894

98. High performance and antifouling vertically aligned carbon nanotube membrane for water purification. Youngbin Baek,Cholin Kim, Dong Kyun Seo, Taewoo Kim, Jeong Seok Lee,Yong Hyup Kim, Kyung Hyun Ahn, Sang Seek Bae, Sang Cheol Lee, Jaelim Lim, Kyunghyuk Lee, Jeyong Yoon, Journal of Membrane Science 460, 171–177 (2014).

97. Electrode asymmetry driven self-gating effect on the electrical detection of protein. Sung Min Seo, Tae June Kang, Youndong Kim, Namyeon Kim, Jay Ahn, Tae Woo Kim, Yong Hyup Kim, Sung Ho Ryu, Young June Park, Sensors and Actuators B: Chemical,Volume 191, Pages 800–805

96. Superstrong encapsulated monolayer graphene by the modified anodic bonding. Wonsuk Jung, Taeshik Yoon, Jongho Choi, Soohyun Kim, Yong Hyup Kim, Taek-Soo Kim and Chang-Soo Han.  Nanoscale, 2014, 6, 547       

2013

95. A new catalyst-embedded hierarchical air electrode for high-performance Li–O2 batteries. Hee-Dae Lim, Hyelynn Song, Hyeokjo Gwon, Kyu-Young Park, Jinsoo Kim, Youngjoon Bae, Hyungsub Kim, Sung-Kyun Jung, Taewoo Kim, Yong Hyup Kim, Xavier Lepr´o, Raquel Ovalle-Robles, Ray H. Baughman and Kisuk Kang, Energy Environ. Sci. 6, 3570 (2013).

94. Enhanced Power and Rechargeability of a Li-O2 Battery Based on a Hierarchical-Fibril CNT Electrode. Hee-Dae Lim , Kyu-Young Park , Hyelynn Song , Eui Yun Jang , Hyeokjo Gwon , Jinsoo Kim , Yong Hyup Kim , Marcio D. Lima , Raquel Ovalle Robles , Xavier Lepro ,Ray H. Baughman , and Kisuk Kang, Advanced Materials 25, 1348–1352 (2013).

2012         

93. Reduced graphene oxide coated thin aluminum film as an optoacoustic transmitter for high pressure and high frequency ultrasound generation. Seok Hwan Lee, Mi-ae Park, Jack J. Yoh, Hyelynn Song, Eui Yun Jang, Yong Hyup Kim, Sungchan Kang, and Yong Seop Yoon, Appl. Phys. Lett. 101, 1909

92. In-situ fabrication of freestanding single-walled carbon nanotube rope interconnection. Taewoo Kim, Tae June Kang*, Dong Kyun Seo, Eui Yun Jang, Kyoung Cheol Jin, Ajeong Choi, Dae-Weon Kim, Yung Woo Park, Dae Hong Jeong, and Yong Hyup Kim*, Physica Status Solidi A 209, 2179-2185 (2012).

91. Suspended SWNT electrode with nanosize gaps. Taewoo Kim, Tae June Kang*, Kunzhou Li, Eui Yun Jang, Jeong Seok Lee, Dong Kyun Seo, Hyeongwook Im and Yong Hyup Kim*, Sensors & Actuators: B. Chemical 173, 517-522 (2012).

90. Flexible Hydrogen Sensors using Graphene with Palladium Nanoparticle Decoration. Min Gyun Chung, Dai-Hong Kim, Dong Kyun Seo, Taewoo Kim, Hyeong Uk Im, Hyun Myoung Lee,Ji-Beom Yoo, Seong-Hyeon Hong, Tae June Kang, and Yong Hyup Kim, Sensors and Actuators B-Chemical 169, 387-392 (2012).

89. Highly Sensitive NO2 Gas Sensor Based on Ozone Treated Graphene. Min Gyun Chung, Dai Hong Kim, Hyun Myoung Lee, Taewoo Kim, Jong Ho Choi, Dong kyun Seo, Ji-Beom Yoo, Seong-Hyeon Hong, Tae June Kang and Yong Hyup Kim, Sensors and Actuators B-Chemical 166, 172-176 (2012).

88. Fibers of Reduced Graphene Oxide Nanoribbons. Eui Yun Jang, Javier Carretero-Gonz lez, Ajeong Choi, Wal Jun Kim, Mikhail E Kozlov, Taewoo Kim, Tae June Kang, Seung Jae Baek, Dae Weon Kim, Yung Woo Park, Ray H Baughman and Yong Hyup Kim, Nanotechnology 23, 235601

87. Enhancement of Heating Performance of Carbon Nanotube Sheet with Granular Metal. Hyeongwook Im,Eui Yun Jang,Ajeong Choi,Wal Jun Kim, Tae June Kang, Yung Woo Park, and Yong Hyup Kim, ACS Applied Materials & Interfaces 4, 2338-2342

86. Wire Electrical Discharge Machining of Carbon Nanofiber Mats for Field Emission. Jin Woo Park, Do Kwan Chung, Bo Hyun Kim, Jong Girl Ok, Wal Jun Kim, Yong Hyup Kim and Chong Nam Chu, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING 13, 593-599

85. Regulation of morphogenesis and neural differentiation of human mesenchymal stem cells using carbon nanotube sheets. Jeong Ah Kim, Eui Yun Jang, Tae June Kang, Sungjun Yoon, Raquel Ovalle-Robles, Won Jong Rhee, Taewoo Kim, Ray H. Baughman,Yong Hyup Kim and Tai Hyun Park, Integrative Biology 4, 587-594 (2012).

84. Twistable and bendable actuator: a CNT/polymer sandwich structure driven by thermal gradient. Dong Kyun Seo, Tae June Kang*, Dae Weon Kim and Yong Hyup Kim*, Nanotechnology 23, 075501

83. Electrical power from nanotube and graphene electrochemical thermal energy harvesters. Tae June Kang, Shaoli Fang, Mikhail E. Kozlov, Carter S. Haines, Na Li, Yong Hyup Kim, Yongsheng Chen and Ray H. Baughman, Advanced Functional Materials 22, 477-489

2011

82. A Reel-Wound Carbon Nanotube Polarizer for Terahertz Frequencies. Jisoo Kyoung, Eui Yun Jang, Marcio D. Lima, Hyeong-Ryeol Park, Raquel Ovalle Robles, Xavier Lepro, Yong Hyup Kim, Ray H. Baughman and Dai-Sik Kim, NANO LETTERS 11, 4227-4231

81. Electromechanical properties of CNT-coated cotton yarn for electronic textile applications. Tae June Kang, Ajeong Choi, Dai-Hong Kim, Kyoungcheol Jin, Dong Kyun Seo, Dae Hong Jeong, Seong-Hyeon Hong, Yung Woo Park and Yong Hyup Kim, SMART MATERIALS & STRUCTURES 20, 015004    

80. Nanocomposite microfiber spinning using a UV-curable polymer in an aqueous environment. T.J. Kang, H. Yoon, J.H. Cheon, H. Jeong, H. Lee and Y.H. Kim, COMPOSITES SCIENCE AND TECHNOLOGY 71, 1495-1500

79. Carbon Nanotube-Based CMOS Gas Sensor IC: Monolithic Integration of Pd Decorated Carbon Nanotube Network on a CMOS Chip and Its Hydrogen Sensing. Sung Min Seo, Jun Ho Cheon, Seok Hyang Kim, Tae June Kang, Jung Woo Ko, In-Young Chung, Yong Hyup Kim and Young June Park, IEEE TRANSACTIONS ON ELECTRON DEVICES 58, 3604-3608

78. Thickness-dependent thermal resistance of a transparent glass heater with a single-walled carbon nanotube coating. Tae June Kang, Taewoo Kim, Sung Min Seo, Young June Park and Yong Hyup Kim, CARBON 49, 1087-1093

77. Statistical property of the effect of Au nanoparticle decoration on the carbon nanotube network. Sung Min Seo, Tae June Kang, Jun Ho Cheon, Jaeheung Lim, In Young Chung, Yong Hyup Kim and Young June Park, APPLIED PHYSICS LETTERS 98, 143106

76. Field-induced ion transfer for deposition on pointed tips and field emission. Wal Jun Kim, Seung Min Lee and Yong Hyup Kim, PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS 5, 116-118

75. Better than 10 mA Field Emission from an Isolated Structure Emitter of a Metal Oxide/CNT Composite. Wal Jun Kim, Jeong Seok Lee, Seung Min Lee, Ki Young Song, Chong Nam Chu and Yong Hyup Kim, ACS NANO 5, 429-435

2010

74. Transparent field emitters with light reflector. Seung-Min Lee, Wal-Jun Kim and Yong-Hyup Kim, PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES 43, 405-409

73. Electrical Characteristics of the Concentric-Shape Carbon Nanotube Network Device in pH Buffer Solution. Jun Ho Cheon, Jaeheung Lim, Sung Min Seo, Jun-Myung Woo, Seok Hyang Kim, Yongjoo Kwon, Jung Woo Ko,Tae June Kang, Yong Hyup Kim and Young June Park, IEEE TRANSACTIONS ON ELECTRON DEVICES 57, 2684-2689

72. Crystal-like Growth of a Metal Oxide/CNT Composite Fiber with Electroplated Seed from a CNT-Dispersed Nonaqueous Electrolyte. Wal Jun Kim, Eui Yun Jang, Dong Kyun Seo, Tae June Kang, Kyoung Cheol Jin, Dae Hong Jeong and Yong Hyup Kim, LANGMUIR 26, 15701-15705

71. Electro-actuation characteristics of Cl-2 and SF6 plasma-treated IPMC actuators. Saim Saher, Woojin Kim, Sungwon Moon, H Jin Kim and Yong Hyup Kim, SMART MATERIALS & STRUCTURES 19, 105013

70. Electrical resistance variation of carbon-nanotube networks due to surface modification of glass substrate. Eui Yun Jang, Dong Kyun Seo, Seoho Jung, Taewoo Kim, Tae June Kang and Yong Hyup Kim, PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE 207, 1912-1917

69. Carbon nanotube field emitter irradiated by proton beam. Seung-Min Lee, Wal-Jun Kim, Yong-Hyup Kim, Taekeun Yang and Juneyong Han, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B 28, 724-728

68. Multifunctional nanocomposite membrane for chemomechanical transducer. Tae June Kang, Dong-Kwon Lim, Jwa-Min Nam and Yong Hyup Kim, SENSORS AND ACTUATORS B-CHEMICAL 147, 691-696

67. O-2 plasma treatment for ionic polymer metal nano composite (IPMNC) actuator. Saim Saher, Sungwon Moon, Seong Jun Kim, H. Jin Kim and Yong Hyup Kim, SENSORS AND ACTUATORS B-CHEMICAL 147, 170-179

66. H-2 sensing characteristics of SnO2 coated single wall carbon nanotube network sensors. Myung Yang, Dai-Hong Kim, Won-Sik Kim, Tae June Kang,Byung Yang Lee, Seunghun Hong, Yong Hyup Kim and Seong-Hyeon Hong, NANOTECHNOLOGY 21, 215501

65. Electroless Gold Plating on Aluminum Patterned Chips for CMOS-Based Sensor Applications. Jung Woo Ko, Hyo Chol Koo, Dong Wan Kim, Sung Min Seo, Tae June Kang,Yongjoo Kwon, Jung Lim Yoon, Jun Ho Cheon, Yong Hyup Kim,Jae Jeong Kim and Young June Park, JOURNAL OF THE ELECTROCHEMICAL SOCIETY 157, D46-D49

2009

64. Macroscopic Single-Walled-Carbon-Nanotube Fiber Self-Assembled by Dip-Coating Method. Eui Yun Jang, Tae June Kang, Hyeongwook Im, Seung Jae Baek, Seongyong Kim, Dae Hong Jeong, Yung Woo Park and Yong Hyup Kim, ADVANCED MATERIALS 21, 4357-4361

2008

63. Single-Walled Carbon-Nanotube Networks on Large-Area Glass Substrate by the Dip-Coating Method. Eui Yun Jang, Tae June Kang, Hyeoung Wook Im, Dae Weon Kim and Yong Hyup Kim, SMALL 4, 2255-2261

62. Deformation characteristics of electroplated MEMS cantilever beams released by plasma ashing. T.J. Kang, J.G. Kim, J.H. Kim, K.C. Hwang, B.W. Lee, C.W. Baek, Y.K. Kim, D. Kwon, H.Y. Lee and Y.H. Kim, SENSORS AND ACTUATORS A-PHYSICAL 148, 407-415

61. Ultra-thin and conductive nanomembrane arrays for nanomechanical transducers. Tae June Kang, Misun Cha, Eui Yun Jang, Jaeha Shin, Hyeong Uk Im, Yunho Kim, Junghoon Lee and Yong Hyup Kim, ADVANCED MATERIALS 20, 3131-3137

60. New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating. Woo Yong Sung, Seung Min Lee, Wal Jun Kim, Jong Girl Ok, Ho Young Lee, Yong Hyup Kim, DIAMOND AND RELATED MATERIALS 17, 1003-1007

59. Fabrication of field emitters with carbon nanotubes using triboelectricity. Lee, Seung-Min; Sung, Woo-Yong; Kim, Wal-Jun; Ok, Jong-Girl; Kim, Yong-Hyup, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS 47, 2339-2341

58. Electrical discharge machining of carbon nanomaterials in air: machining characteristics and the advanced field emission applications. Jong Girl Ok, Bo Hyun Kim, Do Kwan Chung, Woo Yong Sung, Seung Min Lee, Se Won Lee, Wal Jun Kim, Jin Woo Park, Chong Nam Chu and Yong Hyup Kim, JOURNAL OF MICROMECHANICS AND MICROENGINEERING 18

57. Field emission characteristics of carbon nanofibers grown on copper micro-tips at low temperature. Woo Yong Sung, Wal Jun Kim, Ho Young Lee, Yong Hyup Kim, VACUUM 82, 551-555

2007

56. An electrode model for ionic polymer-metal composites. Seong Jun Kim, Sang-Mun Kim, Kwang J Kim and Yong Hyup Kim, SMART MATERIALS & STRUCTURES 16, 2286-2295

55. Robust control of ionic polymer-metal composites. Sunhyuk Kang, Jongho Shin, Seong Jun Kim, H Jin Kim and Yong Hyup Kim, SMART MATERIALS & STRUCTURES 16, 2457-2463

54. Electrical discharge machining of carbon nanofiber for uniform field emission. B.H. Kim, J.G. Ok, Y.H. Kim, C.N. Ch, CIRP ANNALS-MANUFACTURING TECHNOLOGY 56, 233-236

53. Fabrication and the enhanced emission uniformity of carbon nanofibers using a glass cap. Woo Yong Sung, Jong Girl Ok, Wal Jun Kim, Seung-Min Lee, Eui Yun Jang and Yong Hyup Kim, NANOTECHNOLOGY 18, 335705

52. Novel triode-type field emission arrays and appropriate driving method for flat lamp using carbon nanofibers grown by plasma enhanced chemical vapor deposition. Hyeong-Suk Yoo, Woo-Yong Sung, Seung-Jai Yoon, Yong-Hyup Kim, and Seung-Ki Joo, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS 46, 4381-4385

51. Synthesis and field emission characteristics of carbon nanocoils with a high aspect ratio supported by copper micro-tips. Woo Yong Sung, Jong Girl Ok, Wal Jun Kim, Seung Min Lee, Soon Chang Yeon, Ho Young Lee and Yong Hyup Kim, NANOTECHNOLOGY 18, 245603

50. Reduction of sheet resistance and low-thermal-budget relaxation of stress gradients in polysilicon microcantilever beams using nickel-silicides. Tae June Kang, Ho-Young Lee, and Yong Hyup Kim, JOURNAL OF MICROELECTROMECHANICAL SYSTEMS 16, 279-288

49. Field emission characteristics of CuO nanowires by hydrogen plasma treatment. Woo-Yong Sung, Wal-Jun Kim, Seung-Min Lee, Ho-Young Lee, Yong-Hyup Kim, Kyung-Ho Park, Soonil Lee, VACUUM 81, 851-856

48. Sandwich-type laminated nanocomposites developed by selective dip-coating of carbon nanotubes. Tae June Kang, Jang-Won Yoon, Dong-Iel Kim, Sang Seop Kum, Yong-Hak Huh, Jun-Hee Hahn, Sang Heup Moon, Ho-Young Lee, and Yong Hyup Kim, ADVANCED MATERIALS 19, 427-432

47. Performance enhancement of IPMC actuator by plasma surface treatment. Seong Jun Kim, In Taek Lee and Yong Hyup Kim, SMART MATERIALS & STRUCTURES 16, N6-N11

46. Uniformity enhancement of carbon nanofiber emitters via electrical discharge machining. Jong Girl Ok, Bo Hyun Kim, Woo Yong Sung, Chong Nam Chu, and Yong Hyup Kim, APPLIED PHYSICS LETTERS 90, 033117

2006

45. Performance improvement of an ionic polymer-metal composite actuator by parylene thin film coating. Seong Jun Kim, In Taek Lee, Ho-Young Lee and Yong Hyup Kim, SMART MATERIALS & STRUCTURES 15, 1540-1546

44. A new fabrication method for IPMC actuators and application to artificial fingers. Sang Jun Lee, Man Jae Han, Seong Jun Kim, Jae Young Jho, Ho Young Lee and Yong Hyup Kim, SMART MATERIALS & STRUCTURES 15, 1217-1224

43. Field emission characteristics of CuO nanowires grown on brown-oxide-coated Cu films on Si substrates by conductive heating in air. Soon-Chang Yeon, Woo-Yong Sung, Wal-Jun Kim, Seung-Min Lee, Ho-Young Lee, and Yong-Hyup Kim, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B 24, 940-944

2005

42. Low-thermal-budget and selective relaxation of stress gradients in gold micro-cantilever beams using ion implantation. T J Kang, J G Kim, J S Lee, J H Lee, J H Hahn, H Y Lee and Y H Kim, JOURNAL OF MICROMECHANICS AND MICROENGINEERING 15, 2469-2478

41. Three-dimensional analysis of electrode behavior in a human cochlear model. Yoon Seob Lim, Se-Ik Park, Yong Hyup Kim, Seung Ha Oh, Sung June Kim, MEDICAL ENGINEERING & PHYSICS 27, 695-703

40. Analysis of failure of nanobelt-coated copper-based leadframe/ epoxy-based molding compound systems after pull-out test. Ho-Young Lee, Young-Bae Park, Insu Jeon, Yong-Hyup Kim, Young-Keun Chang, MATERIALS SCIENCE & ENGINEERING A: STRUCTURAL MATERIALS: PROPERTIES, MICROSTRUCTURE AND PROCESSING 405, 50-64

39. Linear μ-bending method for the measurement of the residual stress of surface-micromachined MEMS. Jong-Hoon Kim, Jeong-Gil Kim, Soon-Chang Yeon, Young-Keun Chang, Jun-Hee Hahn, Ho-Young Lee, Yong Hyup Kim, SENSORS AND ACTUATORS, A: PHYSICAL 119, 100-112

38. Measurement of the mechanical properties of electroplated gold thin films using micromachined beam structures. Chang-Wook Baek, Yong-Kweon Kim, Yoomin Ahn, Yong-Hyup Kim, SENSORS AND ACTUATORS, A: PHYSICAL 117, 17-27

2004

37. Fracture behaviors of nanowire-coated metal/polymer systems under mode-I loading condition. Ho-Young Lee, Yong-Hyup Kim, Young-Keun Chang, ACTA MATERIALIA 52, 5815-5828

36. Asymptotic postbuckling analysis of composite and sandwich structures via the assumed strain solid shell element formulation. Jihan Kim, Yong Hyup Kim and Sung Won Lee, CMES - COMPUTER MODELING IN ENGINEERING AND SCIENCES 6, 263-276

35. Measurement of micro-tensile properties for hard coating material TiN. Soon Chang Yeon, Yong Hak Huh, Dong Iel Kim, Jun Hee Hahn, Gwang Seok Kim, Yong Hyub Kim, Key Engineering Materials 270, 1113-1118

34. A broadband waveguide filter design using electromagnetic bandgap substrate covers. Won Ho KIM  Dowon KIM  Moonil KIM  Yong-Hyup KIM and Young Kuen CHANG, IEICE TRANSACTIONS ON COMMUNICATIONS E87B, 2176-2177

33. Residual stress relaxation and property modifications of polysilicon films by ion implantation. Ji-Won Suk, Tae-June Kang, Sang-Jun Lee, Jae H. Lee, Jae S. Lee, Jun-Hee Hahn, Ho-Young Lee, Young-Keun Chang and Yong Hyup Kim, SENSORS AND MATERIALS 16, 71-84

32. An Assumed Strain Triangular Solid Element for Efficient Analysis of Plates and Shells with Finite Rotation. J. H. Kim, Y. H. Kim, and S. W. Lee, CMC: Computers, Materials, & Continua 1, 141-152

2003

31. Nano-indentation method for the measurement of the Poisson's ratio of MEMS thin films. Jong-Hoon Kim, Soon-Chang Yeon, Yun-Kwang Jeon, Jeong-Gil Kim, Yong-Hyup Kim, SENSORS AND ACTUATORS A-PHYSICAL 108, 20-27

30. Comparative study of finite element based response evaluation methods for laminated plates. J. W. Park, K. C. Lee, Y. H. Kim, COMPUTATIONAL MECHANICS 32, 115-133

29. Curved quadratic triangular degenerated- and solid-shell elements for geometric non-linear analysis. C. H. Kim, K. Y. Sze, Y. H. Kim, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING 57, 2077-2079

28. A predictor algorithm for fast geometrically-nonlinear dynamic analysis. Ji Won Suk, Jong Hoon Kim and Yong Hyup Kim, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING 192, 2521-2538

27. Efficient finite element analysis using mesh superposition technique. J. W. Park, J. W. Hwang, and Y. H. Kim, FINITE ELEMENTS IN ANALYSIS AND DESIGN 39, 619-638

26. Local recovery of through-the-thickness stresses in laminated composite plates. J. W. Park, and Y. H. Kim, COMPOSITE STRUCTURES 59, 291-296

25. Stress recovery in laminated composite and sandwich panels undergoing finite rotation. B. C. Park, J. W. Park, and Y. H. Kim, COMPOSITE STRUCTURES 59, 227-235

2002

24. Three-Node Macro Triangular Shell Element based on the Assumed Natural Strain. J. H. Kim, and Y. H. Kim, Computational Mechanics 29, 441-458

23. Material Property Identification of Composite Plates Using Neural Network and Evolution Algorithm. B. J. Sung, J. W. Park, and Y. H. Kim, AIAA Journal 40, 1914-1916

22. Re-analysis procedure for laminated plates using FSDT finite element model. J. W. Park, and Y. H. Kim, Computational Mechanics 29, 226-242

21. A three-node CO ANS element for geometrically non-linear structural analysis. J. H. Kim, and Y. H. Kim, Computer Methods in Applied Mechanical and Engineering 191  

20. A partial assumed strain formulation for triangular solid shell element. Chul Hwa Hong and Yong Hyup Kim, Finite Elements in Analysis and Design 38, 375-390

2001

19. A Predictor-Corrector method for structural nonlinear analysis. Jong Hoon Kim and Yong Hyup Kim, Computer Methods in Applied Mechanics and Engineering 191, 959-974

18. An Assumed Strain Triangular Curved Solid Shell Element Formulation for Analysis of Plates and Shells undergoing Finite Rotations. W. I. Hong, J. H. Kim, Y. H. Kim, and S. W. Lee, International Journal for numerical methods in engineering 52, 747-761

17. An Assumed Strain Triangular Solid Shell Element with Bubble Function Displacements for Analysis of Plates and Shells. W. I. Hong, Y. H. Kim and S. W. Lee, International Journal for numerical methods in engineering 52, 455-469

2000

16. Predictor-Corrector Approach for the Analysis of sandwich panels. J. W. Park and Y. H. Kim, AIAA Journal 38, 1489-1493

15. An Assumed Strain formulation of efficient solid triangular element for general shell analysis. J. H. Kim, Y. H. Kim and S. W. Lee, International Journal for Numerical Methods in Engineering 47, 1481-1497

1999

14. Predictor-Corrector Procedure for Displacements, Stresses and Their Sensitivity Coefficients in Composite Panels. J. W. Park, Y. H. Kim, Journal of Composite Materials 133, 1222-1243

1997

13. Frictional Contact/Impact Response of Textile Composite Structures. Karaoglan Levent, A. K. Noor, Y. H. Kim, Composite Structures 37, 269-280    

1996

12. Buckling and Postbuckling of Composite Panels with Cutouts Subjected to Combined Edge Shear and Temperature Change. A. K. Noor, Y. H. Kim, Computers and Structures 60, 203-222

11. Buckling and Postbuckling of Composite Panels with Cutouts Subjected to Combined loads. Y. H. Kim, A. K. Noor, Finite Elements in Analysis and Design 22, 163-185

1995

10. Effect of Mesh Distortion on the Accuracy of Transverse Shear Stresses and Their Sensitivity Coefficients in Multilayered Composites. A. K. Noor, Y. H. Kim, Mechanics of Composite Materials and Structures 2, 49-69

9. Vibration Analysis of Rotating Composite Beams Using a Finite Element Model with Warping Degrees of Freedom. A. D. Stemple, J. W. Rhim, and Y. H. Kim, Computational Mechanics 16, 258-265

1994

8. Transverse Shear Stresses and Their Sensitivity Coefficients in Multilayered Composite Panels. A. K. Noor, Y. H. Kim and J. M. Peters, AIAA Journal 32, 1259-1269

1993

7. Strain Energy of Thermally-Stressed Multilayer Panels and Its Sensitivity Coefficients. A. K. Noor, Y. H. Kim and J. M. Peters, AIAA Journal 31, 1946-1952

1991

6. Finite Element Adaptive Mesh Refinement Technique that Avoids Multipoint Constraints and Transition Zones. Y. H. Kim, I. Levit and G. M. Stanley, Iterative Equation Solvers for Structural, Mechanics Problem ASME 4, 27-35

1990

5. Study of 20-Node Solid Element. Y. H. Kim, R. F. Jones and S. W. Lee, Communications in Applied Numerical Methods 6, 197-197

1989

4. A Small Strain, Moderately Large Deflection Finite Element Beam Model with Cross-Sectional Warping Effect. Y.H. Kim and S.W. Lee, Computational Mechanics 5, 366-374

3. An Assumed Strain Solid Element Model for Geometrically Nonlinear Shell Analysis. Y.H. Kim and S.W. Lee, Analytical and Computational Models of Shells ASME 3, 241-259

1988

2. A Solid Element Formulation for Large Deflection Analysis of Composite Shell Structures. Y.H. Kim and S.W. Lee, Computers and Structures 30, 269-274

1987

1. A New Approach to The Finite Element Modelling of Beams with Warping Effect. S,W,Lee and Y,H,Kim, International Journal for Numerical Methods in Engineering 24, 2327-2341

Korean Chinese (Simplified) English